MODULE B · P2B01

Principles of Lending, Different Types of Borrowers, and Types of Credit Facilities

3508 manuscript words25 original MCQsDated sources and verification notes included
Chapters and chapter contents
100%
Practise this chapter ↓

Last updated · By the Clerk2Officer editorial team · Report a correction

Credit-facility design

Credit-facility design1. PurposeUse the buttons for explanation2. BorrowerUse the buttons for explanation3. Cash cycleUse the buttons for explanation4. FacilityUse the buttons for explanation5. RepaymentUse the buttons for explanation6. ControlUse the buttons for explanation

State the business purpose and source of funds.

Principles of Lending, Different Types of Borrowers, and Types of Credit Facilities

Chapter P2B01 · Module B · Principles and Practices of Banking

1. Credit begins with a repayment proposition

A bank lends money or undertakes a credit commitment because it expects the borrower to meet an obligation from an identifiable source. The basic question is not merely “what security is available?” but “how will this exposure be repaid in the normal course?” Collateral can reduce loss if repayment fails, but a lender should not design an ordinary business loan around the hope of selling the borrower's property.

  • Identify the normal repayment source before relying on collateral.

This chapter introduces sound lending principles, borrower forms and facility types. Later chapters examine appraisal, operations, collateral, documentation and recovery in detail. Here the learner should understand how the customer's purpose, cash cycle, legal capacity and risk determine the structure of credit. A good facility matches a real need; a poorly matched facility can create stress even where the borrower is honest and the underlying business is viable.

  • Match the facility to purpose, cash cycle, legal capacity and risk.

The initial credit questions are:

  • Who is borrowing and who has authority to bind that borrower?
  • What is the lawful purpose and actual amount needed?
  • What cash flow will repay the exposure, and when?
  • What can go wrong, and how much protection exists?
  • Which facility and conditions best fit that pattern?
2. Safety: willingness and ability to repay

Safety in lending means a reasoned expectation of repayment, supported by analysis and controls. It does not mean absolute certainty. Credit risk exists because future cash flow and behaviour are uncertain. The lender should examine both ability and willingness: a profitable business may still divert funds, while a trustworthy borrower may be unable to repay after an adverse event.

  • Safety requires assessment of both repayment ability and willingness.

The familiar five Cs provide a useful organising device. Character concerns integrity and conduct; capacity concerns repayment ability; capital concerns the borrower's own financial stake; collateral concerns secondary protection; conditions concern the business, economy and transaction environment. These are teaching categories, not a statutory formula that automatically produces a sanction.

  • The five Cs organise appraisal; they are not an automatic statutory sanction formula.

A sound assessment looks for consistency. Sales shown in accounts should broadly align with cash receipts, tax records and business activity, allowing for legitimate timing differences. A borrower who refuses to explain major inconsistencies requires further examination. A strong personal relationship with the branch cannot substitute for evidence, and a high credit score cannot answer every question about a new business proposal.

  • Reconcile sales, receipts and activity; relationships and scores do not replace evidence.
3. Liquidity and matching the repayment source

Liquidity concerns the bank's ability to meet its own obligations and the timing with which a loan converts back into cash. A short-term facility should normally finance an asset or activity that generates funds within a compatible period. Using repeatedly renewable short-term borrowing to finance a long-lived asset can create refinancing dependence. The borrower may appear current only because the limit is continuously rolled over.

  • Funding tenor should match cash generation; repeated rollover can conceal refinancing dependence.

A machine expected to produce benefits over several years may suit a term loan with repayments aligned to those benefits. Inventory and receivables that revolve through an operating cycle may suit working-capital finance. The distinction is not based solely on whether the borrower is a small or large business. The same enterprise may need both facilities for different purposes.

  • Fixed assets and revolving current assets commonly require different credit structures.

Matching requires attention to:

  • the time between cash outlay and collection;
  • seasonality and peak funding needs;
  • the useful economic life of financed assets;
  • the borrower's own contribution;
  • realistic repayment dates and contingency liquidity.
4. Profitability, purpose and diversification

A loan's profitability is not simply its quoted interest rate. Funding cost, operating expense, expected credit loss, capital use and service requirements affect the return. A high-rate loan with a high probability of default can be less attractive than a lower-rate loan with reliable cash flow and modest servicing cost. Fee income from a guarantee or letter of credit also comes with risk and capital implications.

  • Net lending return depends on funding, operating, loss and capital costs as well as interest.

Purpose matters because the bank must understand and monitor what it finances. A sanction for inventory should not silently become finance for the proprietor's unrelated property purchase. Diversion can weaken the expected repayment source and breach conditions. End-use verification should be designed around the transaction rather than reduced to a standard declaration collected and forgotten.

  • End-use checks connect disbursement to the sanctioned repayment source.

Diversification reduces excessive dependence on a single borrower, group, sector, geography or risk driver. Ten borrowers in the same supply chain may be exposed to the same shock, so account count alone does not prove diversification. Regulatory exposure limits and the bank's internal risk appetite must be checked separately; this chapter does not invent a universal current percentage for every bank category.

  • Diversification concerns common risk drivers, not merely the number of accounts.
5. Primary repayment and secondary support

Primary repayment normally comes from the activity or income being financed. A salaried housing borrower may repay from income; a manufacturer may repay working capital from sales collections; a project loan may rely on project cash flow. Secondary support includes enforceable collateral and guarantees, whose value depends on legal validity, realisability and the provider's resources.

  • Normal income or business cash flow is primary repayment; enforceable security is secondary support.

Suppose a retailer requests ₹20 lakh because receivables are collected slowly. A property valued at ₹50 lakh may provide comfort, but it does not explain whether the business can service interest or why customers are paying late. The bank should examine receivable ageing, disputes and concentration. If the underlying sales are doubtful, increasing collateral does not repair the operating model.

  • Receivable ageing and collectability must explain the retailer’s funding need despite valuable property.

A strong credit structure therefore combines:

  • credible normal-course repayment;
  • adequate borrower contribution;
  • appropriate facility and repayment schedule;
  • enforceable documentation and security where applicable;
  • monitoring of cash flow and early warning signs;
  • a realistic response if assumptions deteriorate.
6. Individuals and sole proprietors

For an individual, the lender examines legal capacity, income, existing obligations, purpose and authority. A minor's contractual position requires special care; ordinary lending should not be assumed valid merely because an account can be opened for a minor. Account eligibility and capacity to incur an enforceable borrowing obligation are different issues.

  • Account-opening eligibility and enforceable borrowing capacity are different questions.

A sole proprietorship is not a separate legal person from its proprietor. The business name identifies the activity, but the proprietor is the relevant person for liability. The bank should connect business cash flow with household withdrawals and other personal debts. Ignoring the household can overstate repayment capacity; mixing every personal receipt with business turnover can overstate business performance.

  • The proprietor and proprietorship are not separate legal persons; household withdrawals affect capacity.

Example: A proprietor's business generates ₹70,000 monthly surplus before debt service. Existing instalments are ₹20,000 and essential household withdrawals ₹35,000. Only ₹15,000 remains before a new loan and contingencies. A proposed additional ₹18,000 instalment is not supported by those assumptions merely because business sales are high.

  • ₹70,000 − ₹20,000 − ₹35,000 leaves ₹15,000, below the proposed ₹18,000 instalment.
7. Partnerships and LLPs

In an ordinary partnership, the deed, nature of business, partner authority and applicable law are central. Section 25 of the Partnership Act provides joint and several liability for acts of the firm done while a person is a partner. [S1] The bank must still verify that the borrowing and security creation are authorised and properly documented. A change in partners can affect mandates, guarantees and continuity of the credit arrangement.

  • Ordinary partners have joint and several liability for relevant firm acts; borrowing authority still needs verification.

An LLP is a body corporate with a legal identity separate from its partners. [S2] Limited liability does not mean absence of risk or immunity for every wrongful act. The bank should inspect the LLP agreement, authorised decision process, financial statements and any separately offered personal guarantee. It should not assume that every partner is personally liable for all LLP debt in the same way as an ordinary partner.

  • An LLP has separate legal identity; partner liability should not be assumed identical to an ordinary partnership.

The practical comparison is:

  • Proprietorship: proprietor and business are not separate persons.
  • Ordinary partnership: partner authority and statutory partner liability require examination.
  • LLP: separate legal entity; partner liability and any additional obligation need their own basis.
  • Company: separate corporate borrower with its own powers and authorisation requirements.
8. Companies and other institutional borrowers

For a company, the lender examines incorporation, constitutional documents, permitted business, borrowing powers, resolutions and authorised execution. A director's signature is not a substitute for checking corporate authority. Where charge registration is required, documentation and registration must be completed under the applicable law and deadlines. Detailed charging requirements are developed in B05 and B06.

  • Company borrowing requires appropriate powers, authorisation and valid security formalities.

Trusts, societies, clubs, associations, local bodies and statutory entities require their own governing documents and legal analysis. The bank should establish whether borrowing is permitted, who can authorise it, what assets can secure it and whether any government or other consent is necessary. The fact that an organisation has a bank account does not prove unrestricted power to borrow.

  • Each specialised entity’s governing documents determine borrowing and security powers.

For an HUF or similar specialised borrower form, identify the authority and purpose under applicable law rather than apply the company checklist mechanically. For a government-linked entity, do not assume an implicit sovereign guarantee. A guarantee must be established from a valid instrument and authority; ownership or a prestigious name is not the same thing.

  • Government ownership does not itself establish a sovereign guarantee.
9. Fund-based and non-fund-based facilities

A fund-based facility involves actual deployment of the bank's funds, such as a cash-credit drawal, overdraft, term loan or bill purchase. A non-fund-based facility involves a commitment or contingent obligation, such as a guarantee or letter of credit, before payment is made. The distinction describes the facility's initial form, not whether credit risk exists.

  • Fund-based facilities deploy funds; non-fund facilities initially create commitments or contingent exposure.

If a bank pays under a guarantee or a letter of credit and the customer does not reimburse it, the contingent exposure can become a funded receivable. Therefore, non-fund limits require appraisal of the customer's ability to meet the underlying obligation. Commission income does not make them risk-free.

  • Payment under an LC or guarantee can turn a contingent exposure into a funded claim.

A facility summary should identify:

  • sanctioned amount and sublimits;
  • purpose and permitted use;
  • availability and maturity;
  • repayment or reimbursement source;
  • security, margin and conditions;
  • how utilisation and contingent commitments are monitored.
10. Cash credit and drawing power

Cash credit commonly provides revolving working-capital finance against eligible current assets under the sanction. The borrower draws and repays within the permitted availability. The sanctioned limit is the maximum approved ceiling; drawing power is the amount supported by eligible assets after the prescribed adjustments and margin. Actual availability is constrained by both and by other conditions.

  • Cash-credit availability is constrained by both sanctioned limit and supported drawing power.

Illustration: Assume eligible paid stock of ₹12 lakh and eligible receivables of ₹8 lakh. Assume the sanction permits both at a uniform 25% margin, with no other adjustment. Drawing power is (₹12 lakh + ₹8 lakh) × 75% = ₹15 lakh. If the sanctioned limit is ₹18 lakh, the asset-based ceiling is ₹15 lakh. With ₹11 lakh already outstanding, further drawal headroom is ₹4 lakh, assuming no other restriction.

  • The stated margin gives ₹15 lakh drawing power and ₹4 lakh further headroom after ₹11 lakh utilisation.

The assumptions matter. Actual calculations may deduct unpaid stock, exclude old or related-party receivables, apply different margins or reserve amounts for other obligations. A borrower cannot increase availability merely by reporting the same receivable twice. Stock statements should be supported by monitoring and verification, not accepted as self-proving collateral value.

  • Ineligible or duplicated assets cannot support additional drawing power.
11. Overdraft and working-capital demand loans

An overdraft permits an account to be overdrawn within an agreed arrangement. It may be secured by deposits or other assets, or based on an approved credit assessment. Its operation depends on the sanction, not on an assumption that any current account may go negative. A temporary excess is not automatically a new permanent sanctioned limit.

  • An overdraft requires an approved arrangement; temporary excess is not a permanent sanctioned enhancement.

A working-capital demand loan can provide a defined funded amount for working-capital purposes, with repayment or review terms stated in the sanction. It differs operationally from a freely revolving cash-credit arrangement. The facility should fit the expected need and the applicable regulatory and bank policy framework.

  • A working-capital demand loan provides a defined funded amount under specified repayment terms.

The banker should distinguish sanctioned limit, outstanding balance, undrawn amount, drawing power and overdue amount. These are not synonyms. A borrower can have a sanctioned facility with no current drawal; an account can be within the nominal limit but fail another condition; and repayment can reduce outstanding without automatically changing the sanctioned ceiling.

  • Limit, outstanding, drawing power, undrawn availability and overdue amounts measure different things.
12. Bills and receivables finance

Bill purchase or discounting can accelerate cash from an underlying trade receivable. The bank should establish that the transaction is genuine, the instrument and documents are valid, the debtor is credible and the receivable has not been financed twice. Financing paper without a real commercial transaction creates a different risk from financing a normal sale.

  • Bill finance requires a genuine trade transaction and checks against duplicate financing.

A demand bill and a usance bill have different payment timing. Discounting generally recognises the time to maturity in the amount advanced. Recourse arrangements determine who must pay if the drawee does not. “Without recourse” must be established by the actual structure; it should not be inferred from a marketing description.

  • Demand and usance describe timing; recourse depends on the actual agreement.

Simple illustration: A ₹5,00,000 eligible bill has 90 days to maturity. Assuming a simple 10% annual discount on a 365-day basis and no fees, discount is ₹5,00,000 × 10% × 90/365 = ₹12,328.77. Net proceeds are approximately ₹4,87,671.23. This is a teaching calculation; actual day-count, charges and accounting follow the contract and applicable rules.

  • At the stated rate and day count, discount is ₹12,328.77 and net proceeds are ₹4,87,671.23.
13. Term loans and demand loans

A term loan finances a requirement with a specified repayment schedule, often a fixed asset or longer-term purpose. Disbursement may occur in stages against verified progress or invoices. Repayment should reflect the asset's useful life and expected cash generation, with appropriate borrower contribution. A moratorium postpones specified payments; it does not necessarily waive interest.

  • Term-loan repayment should reflect cash generation; a moratorium does not necessarily waive interest.

A demand loan is repayable on demand under its terms, though the bank may set an expected repayment programme. The legal repayment feature and the practical cash-flow plan should both be understood. Labelling a facility “demand” does not eliminate the need to assess whether the borrower can repay.

  • A demand repayment clause does not replace assessment of practical repayment capacity.

Term-loan structuring should consider:

  • total project cost and sources of finance;
  • timing and conditions of disbursement;
  • implementation and cost-overrun risk;
  • interest during construction or moratorium;
  • repayment instalments and seasonal cash flows;
  • residual value and security perfection.
14. Guarantees and letters of credit

A bank guarantee supports an obligation to a beneficiary under the guarantee's terms. Financial and performance guarantees address different underlying obligations. The bank must assess the applicant, wording, amount, expiry, claim conditions and reimbursement arrangements. A performance guarantee can still produce a financial payment by the bank if validly invoked.

  • Guarantee wording, claim conditions and reimbursement capacity determine the bank’s obligation and risk.

A documentary letter of credit provides an undertaking linked to a complying presentation under its terms and applicable rules. Banks deal with documents in the documentary-credit framework, not a physical inspection guarantee that the goods are satisfactory. The buyer's dispute with the seller does not automatically cancel the bank's separate undertaking. B10 and B11 develop these distinctions in detail.

  • Documentary-credit undertakings concern complying documents and remain distinct from underlying goods disputes.

The key lending lesson is that the applicant must be able to meet reimbursement when payment becomes due. An LC used to buy inventory requires a credible sale-and-collection cycle. A guarantee supporting a contract requires capacity to perform that contract. A cash margin reduces exposure but does not remove every legal, operational or reputational risk.

  • Applicants need credible reimbursement capacity even where the bank holds cash margin.
15. Other facilities and combined structures

Other credit arrangements include export pre-shipment and post-shipment finance, bridge finance, receivables purchase, leasing-related finance and syndicated or consortium lending. Their suitability depends on the transaction and current regulatory framework. A bridge loan should have an identifiable take-out source; repeated extension without that source can conceal a long-term funding gap.

  • Bridge finance needs an identifiable take-out source and must comply with the applicable framework.

Multiple facilities must be viewed together. A borrower may have cash credit, bills and an LC sublimit linked to the same inventory cycle. The bank should avoid double financing the same assets and understand whether sublimits are interchangeable or carved out of an overall ceiling. Separate sanction numbers do not make economic exposures independent.

  • Linked facilities and sublimits must be assessed together to prevent double financing.

Combined case: A manufacturer needs ₹30 lakh for a machine, ₹10 lakh seasonal inventory support and a ₹5 lakh performance guarantee. A possible structure is a term loan, a suitable working-capital line and a non-fund guarantee limit, each appraised and documented. One undifferentiated overdraft may obscure repayment, end use and contingent risk. The structure remains illustrative, not a recommendation without appraisal.

  • The illustrative machine, inventory and guarantee needs call for distinct funded and contingent structures.
16. Choosing a facility and monitoring it

Facility selection should follow the need rather than precede it. Begin with the operating cycle or investment, identify the funding gap, choose a structure, test repayment under stress and set monitoring conditions. The borrower should understand when funds are available, what evidence is required and what happens if conditions are breached.

  • Choose the facility after assessing the funding need, repayment and monitoring requirements.

Monitoring should look beyond whether interest was paid this month. Rising receivable days, declining account turnover, repeated ad hoc requests, unexplained related-party transfers and delayed project completion can signal deterioration. A response may involve clarification, closer monitoring, revised assumptions or corrective action under the applicable framework. Automatically increasing a limit to cover every shortfall is not credit management.

  • Receivable delays, weak turnover and repeated ad hoc requests can warn of deterioration.

Revision points:

  • Repayment capacity comes before collateral comfort.
  • Match facility tenor to the asset or cash cycle.
  • Legal borrower form determines authority and liability checks.
  • Non-fund exposure can become funded exposure.
  • Sanctioned limit, drawing power and outstanding are different.
  • A moratorium does not automatically mean interest waiver.
  • Monitor combined exposure and avoid double finance.
  • Use current category-specific rules for numerical regulatory limits.
LEARN THROUGH EXPLANATIONS

Chapter practice

This practice is separate from timed mock tests. Answers and explanations appear after you choose an option.

Your reading progress

Sign in to save your progress across devices.

Browse published timed tests for this paper