Last updated · By the Clerk2Officer editorial team · Report a correction

1. Connect funding to the bank's obligations
A treasury raises and deploys money within legal, supervisory and internal constraints. Funding is therefore more than selecting the lowest quoted rate. The bank needs the right amount, currency, maturity and settlement access, while maintaining required reserves and sufficient usable liquidity. A source that is cheap but uncertain at renewal can create a fragile balance sheet. A source that arrives after the payment deadline cannot solve today's shortage. Begin with a dated cash forecast and identify which resources are confirmed rather than merely hoped for.
Fictional Meridian Bank expects a large deposit maturity and several customer payments this week. Its treasury must distinguish operating cash, reserve requirements, eligible securities and borrowing capacity. These resources have different conditions and cannot automatically be counted twice. A government bond may satisfy a specified regulatory asset requirement yet need operational steps before it can raise cash. A central-bank facility may require eligible collateral and access. The funding plan should show these dependencies rather than assume that every valuable asset is immediately spendable.
This chapter covers CRR, SLR, the liquidity adjustment framework and payment and settlement systems. It explains the mechanisms and uses explicitly supplied rates in calculations. Current prescriptions can change and may differ by institution category. The source register records official references and retrieval limitations. The RBI circular's operative wording was located through the official indexed text and corroborated by its October bulletin: daily CRR maintenance increased to 99% of the requirement from the fortnight beginning 16 October 2026, distinct from the average requirement.
2. Understand the purpose of CRR
The Cash Reserve Ratio requires specified cash balances with the Reserve Bank under the applicable framework. The relevant liability base is defined by rules rather than simply every balance-sheet liability added together. For a supplied base of INR10,000 crore and an assumed CRR of 3%, the basic arithmetic requirement is INR300 crore. This calculation does not establish the bank's actual net demand and time liabilities, exemptions, reporting date or compliance. Those must be determined before applying the percentage to a real return.
CRR affects deployable resources and the treasury's cash planning. A bank cannot assume that the entire deposit inflow is available for lending or investment without considering applicable reserve and liquidity needs. At the same time, a reserve requirement is not identical to a business liquidity buffer. The two can have different definitions, purposes and availability. A prudent forecast distinguishes required balances from discretionary resources so that a proposed payment or investment does not rely on money that must be maintained for another obligation.
The relevant law, directions and institution scope matter. Commercial-bank directions do not necessarily establish identical treatment for every category of bank. Changes can affect the rate, liability calculation, maintenance or reporting. Record the version and effective date, and separate the examination's prescribed cutoff from the current operational position. A historical question may legitimately supply an older rate; the correct arithmetic follows that stated case without implying that the same rate remains current for all later transactions.
3. Separate average maintenance from a daily floor
An average maintenance requirement and a daily minimum are different constraints. Meeting one does not automatically meet the other. If the required average balance is INR300 crore over fourteen days, total balance-days must reach INR4,200 crore-days. Holding too little on one day might still permit the average to be restored later, but a separate daily floor can prohibit that low balance. The applicable floor and maintenance period must be verified from the operative rules rather than inherited from a remembered historical percentage.
Using the dated 99% daily-floor provision with an illustrative INR300 crore average requirement gives a daily minimum of INR297 crore. If thirteen daily observations total INR3,850 crore-days, the final day needs INR350 crore to reach the INR4,200 target. The final-day amount must also satisfy the separate floor. Meeting the final total cannot retrospectively cure an earlier daily breach. This arithmetic uses a simplified fixed requirement; the actual base, period and applicable conditions still need to be established for a real bank.
Students should recognise the trap of reading an introductory sentence as the amended rule. A circular may first describe the previous position and then announce a new requirement. Search snippets can show only the first part. For calculations, the tool therefore accepts the daily-floor percentage as an explicit input and labels it an assumption. For regulatory review, read the entire operative instrument and its effective date. A neat calculation using an unverified threshold remains an unreliable compliance conclusion.
4. Understand SLR and eligible assets
The Statutory Liquidity Ratio concerns maintaining specified assets against the defined liability base under the applicable framework. The composition and eligibility conditions matter as much as the percentage. It should not be described simply as another cash balance identical to CRR. A bank may hold relevant cash, gold or approved securities as permitted, subject to governing definitions and conditions. The bank must establish which assets qualify and how they are valued before comparing their recognised amount with the requirement.
With an explicitly supplied base of INR10,000 crore and an assumed SLR of 18%, the arithmetic requirement is INR1,800 crore. If eligible recognised holdings are INR1,850 crore, the simple excess is INR50 crore. If a portion is not eligible or cannot be recognised under the applicable encumbrance treatment, the apparent excess can disappear. The calculator accepts an already established eligible amount; it does not classify securities, apply the complete valuation rules or determine legal availability from the asset's name.
SLR and the Liquidity Coverage Ratio have different frameworks. A security's treatment for one purpose should not be assumed to answer every question under the other. Some collateral arrangements have specified treatment and exceptions, so a blanket statement that every pledged security is either always eligible or always ineligible can be wrong. The relevant direction must be checked. Management also needs to prevent double counting resources in a funding plan even where a rule permits a particular asset to receive recognition for a defined regulatory measure.
5. Read the combined resource effect carefully
CRR, SLR and operating liquidity can all influence how the bank deploys funding, but simply adding percentages can be misleading if bases, eligible assets or availability differ. For a deliberately simplified example with a common INR10,000 crore base, 3% cash reserve and 18% eligible-asset requirement imply INR300 crore and INR1,800 crore respectively. Their sum is INR2,100 crore in that exercise. This does not prove that the remaining INR7,900 crore is freely lendable or that all other constraints have disappeared.
The bank also faces capital, liquidity, concentration, operational and business limits. Existing assets and liabilities create future flows, and the cost of reserves influences pricing. A new deposit may improve cash today while increasing future repayment obligations and relevant reserve requirements. Treasury should model the incremental balance-sheet effect rather than assume that every rupee received creates an equal permanent lending capacity. Funds transfer pricing can help communicate these costs to business lines, provided the allocation method is transparent and consistent.
Reconciliation matters. The liability base used in reserve calculations should be traceable to source records and adjustments. Eligible holdings should reconcile to custody and accounting records. Missing classifications, stale values or duplicated assets can produce a favourable ratio without real compliance. Independent checks should examine both the arithmetic and the underlying data. A calculator can verify multiplication, but it cannot establish that the supplied base and asset amount were legally and operationally correct.
6. Explain liquidity adjustment operations
Central-bank liquidity operations influence the availability and price of banking-system funds. A repo-style injection provides cash against eligible securities under specified terms, while an absorption operation removes liquidity through the relevant arrangement. The current operating framework can include standing facilities, variable-rate operations and other instruments. Their purposes, rates and access conditions should be distinguished. Do not treat a historical description of the corridor or a past policy rate as a timeless rule for today's treasury.
At the transaction level, identify who supplies cash, what collateral is delivered, the maturity, rate and reverse obligation. Suppose an authorised illustrative borrowing provides INR100 crore for one day at 6% on a 365-day simple basis. Interest is approximately INR164,383.56. The transaction supplies cash today but creates repayment tomorrow. Eligible collateral, settlement capacity and applicable conditions still need verification. A facility's existence does not mean every institution can obtain unlimited funds whenever it chooses.
Liquidity operations should also be separated from outright open-market transactions. An outright purchase or sale changes the security holding without the same contractual repurchase leg as a repo. Both can affect system liquidity, but their cash-flow structures differ. For examination questions, describe the operation and direction of funds before calculating interest or interpreting policy effects. This avoids confusing the central bank's perspective with the commercial bank's perspective, a common source of reversed answers in repo and reverse-repo cases.
7. Treat collateral as an operational resource
A collateral schedule should identify asset, quantity, market value, haircut, encumbrance, location and mobilisation process. If an eligible asset is valued at INR100 crore with an assumed 5% haircut, the simple initial cash support is INR95 crore. The INR5 crore difference is a valuation cushion, not interest earned by the lender. Price changes can require additional collateral or cash under the arrangement. Funding plans should therefore consider both initial capacity and potential margin demands during stress.
Operational readiness can limit access even when sufficient assets exist. Documentation may be incomplete, access rights unavailable or transfer cutoffs missed. Staff should know who can authorise a pledge and how to verify completion. Test the process before relying on it in a contingency plan. A theoretical borrowing capacity that takes two days to mobilise cannot be counted as certain same-day cash for an obligation due this afternoon. The plan needs realistic timing and an alternative if the process fails.
Do not count the same securities simultaneously as available for unrelated sales, borrowing and other obligations unless the actual arrangements support those uses. A consolidated asset total can hide prior commitments. Reconcile treasury's inventory with custody and settlement records, including pending transactions. Collateral management is therefore a daily information and control task, not only an annual policy statement. It connects valuation, legal rights and practical access to the resources that make a funding strategy executable.
8. Distinguish payment instructions from settlement
A payment instruction requests a transfer; clearing determines or exchanges obligations through the relevant process; settlement discharges them through the specified transfer of funds or assets. These stages can occur differently across systems. A message accepted by a network is not automatically final beneficiary credit. Treasury needs evidence of the actual state so that it can forecast balances, avoid duplicate payments and investigate failures. Customer communication should use accurate status labels rather than describe every submitted instruction as completed settlement.
Real-time gross settlement processes eligible transactions individually rather than only a later net batch, while a deferred net arrangement settles defined net obligations at specified times. These broad concepts do not establish every operating detail of a named system. Current hours, limits, access and procedures require official verification. The economic distinction remains useful: gross settlement can create significant intraday funding needs, while netting can reduce settlement amounts but leaves obligations dependent on the arrangement's rules and timing.
In a securities transaction, delivery-versus-payment links asset delivery and cash payment under the relevant mechanism, reducing a particular principal risk. Payment-versus-payment links the exchange of currencies under a suitable arrangement. Neither removes all market, liquidity, legal or operational exposure. Treasury should identify which risks the mechanism addresses and which remain. A safer settlement design still needs sufficient balances, correct instructions, functioning systems and reconciliation after completion.
9. Manage intraday resources and failed payments
End-of-day cash can be positive while an earlier payment lacks funding. Suppose Meridian must pay INR60 crore at 10 a.m. and expects INR70 crore at 4 p.m., starting with INR20 crore. The daily net change is favourable, but the morning shortfall is INR40 crore before other resources. Treasury must arrange timely liquidity or manage payments within contractual and system rules. Adding the evening receipt to the morning balance without recognising its timing would conceal the actual problem.
Intraday forecasts should identify major receipts, payments, settlement deadlines and potential delays. Payment prioritisation and queue management can help where permitted, but delaying a critical obligation can create consequences for customers or other participants. Counterparty receipts are not fully under the bank's control. Stress a delayed incoming payment, a system outage or an unexpected collateral call. The institution should know which resources are available immediately and which require an approval or mobilisation step before use.
Failed or ambiguous payments require controlled investigation. A retry should not create a duplicate if the first instruction actually settled. Unique references, reliable status checks and reconciliation help. Changes to settlement instructions need authentication and appropriate approval. Record what happened and preserve evidence; an informal cancellation request may not reverse a final payment. Treasury's liquidity view and operations' transaction status should remain aligned so that missing or duplicated records do not lead to a second funding or payment error.
10. Maintain reporting, controls and version records
Regulatory returns require the prescribed definitions, formats and timing for the institution concerned. Internal management information should be sufficiently frequent for decisions and can need greater detail than an external return. A bank should not wait for the reporting date to investigate an emerging shortfall. Data ownership, reconciliations, independent review and controlled changes are essential. A consistent source trail allows a reviewer to understand how the reported liability base, recognised assets and maintenance figures were produced.
Rule management needs the same discipline. Record the authority, instrument, consolidation date, amendments and commencement. A retrieved older page and a current index entry are different evidence. The source register for this module explicitly records the unresolved full-text retrieval for some later changes. This prevents a student or publisher from mistaking a teaching assumption for a verified current prescription. Where a question supplies a rate, calculate using it and state the assumption; where it asks for current law, the operative source must support the answer.
For revision, distinguish CRR from SLR, average maintenance from daily minimum, collateral value from cash support and payment messaging from final settlement. Trace each resource through time and identify the condition that makes it usable. The calculators below illustrate reserve amounts, remaining-day average requirements, repo interest and intraday shortfalls. They support understanding and error detection, while actual compliance remains dependent on correctly established inputs, scope and dated rules.
11. Prepare a controlled funding recommendation
Meridian's recommendation should begin with confirmed obligations and resources. Show the reserve requirements separately from the operational cash forecast, identify eligible collateral and calculate the time-specific funding gap. Compare available borrowing sources by tenor, cost, conditions and execution time. A slightly more expensive reliable source may be preferable to a cheaper line that is uncommitted or cannot settle before the deadline. The decision should explain this trade-off rather than rank sources by interest percentage alone.
Next evaluate tomorrow's position after today's borrowing matures. Include principal, interest, collateral release and any further expected flows. A sequence of overnight solutions can conceal a persistent structural mismatch if each day is reviewed in isolation. Escalate that pattern to the appropriate balance-sheet governance process. Daily treasury execution and longer-term funding strategy should reinforce each other, with limits and internal pricing discouraging business growth that depends on continuous optimistic refinancing assumptions.
Finally, record authority and verify execution. Front office captures the borrowing, independent oversight checks relevant limits, and operations confirms settlement and reconciles balances. Review forecast differences and any failed or delayed transaction. This closes the loop from policy through calculation to actual cash. The chapter's central lesson is that funding and regulation meet in a practical schedule of obligations: compliance amounts, collateral and payment systems all matter because the bank must deliver the right resources at the right time under the applicable conditions.
Chapter practice
This practice is separate from timed mock tests. Answers and explanations appear after you choose an option.
Your reading progress
Sign in to save your progress across devices.