At a glance

  • Operating cycle = raw material period + work-in-progress period + finished goods period + receivables period − payables period.
  • Gross working capital = current assets; net working capital = current assets − current liabilities.
  • Turnover method (Nayak Committee): working capital = 25% of projected turnover, of which bank finance is 20% and margin 5%, used for smaller limits.
  • MPBF (Tandon) Method II: bank finance = 75% of current assets − other current liabilities, so the borrower funds 25% of current assets.
  • Cash budget method suits seasonal and service businesses where cash flows are uneven.

You will learn

  • What drives working capital need
  • Calculating the operating cycle in days
  • Turnover, MPBF and cash budget methods with examples
  • Drawing power, stock statements and monitoring
  • Signs that working capital is being diverted

01Why the operating cycle matters

A business buys raw material, converts it into goods, sells on credit and finally collects cash. Money is locked up at each stage. The longer the cycle, the more working capital the business needs. Bank working capital finance (cash credit, overdraft, bill finance) fills the gap between what the business must spend and what it collects.

Cash-to-cash cycle of a manufacturer

  1. 1
    CashPays suppliers (after credit period).
  2. 2
    Raw materialHeld in stores.
  3. 3
    Work-in-progressUnder production.
  4. 4
    Finished goodsAwaiting sale.
  5. 5
    ReceivablesSold on credit, awaiting collection.
  6. 6
    CashCollected; cycle repeats.

02Calculating the operating cycle

Operating cycle (days) = RM days + WIP days + FG days + Receivable days − Payable days
  • RM days = average raw material stock ÷ annual RM consumption × 365
  • WIP days = average WIP ÷ annual cost of production × 365
  • FG days = average finished goods ÷ annual cost of sales × 365
  • Receivable days = average debtors ÷ annual credit sales × 365
  • Payable days = average creditors ÷ annual credit purchases × 365
Worked example
Raw material holding
30 days
Work-in-progress
10 days
Finished goods
20 days
Receivables
45 days
Less: payables
(35 days)

Operating cycle = 30 + 10 + 20 + 45 − 35 = 70 days. Roughly 365 ÷ 70 ≈ 5.2 cycles a year.

03Method 1: Turnover method

Recommended by the Nayak Committee for small borrowers, this method assumes an operating cycle of about three months. Working capital requirement is taken as 25% of projected annual turnover. The borrower brings 5% as margin and the bank finances 20%.

Turnover method
Projected annual turnover
₹2 crore
Working capital requirement (25%)
₹50 lakh
Borrower's margin (5% of turnover)
₹10 lakh
Bank finance (20% of turnover)
₹40 lakh

Eligible limit: ₹40 lakh, subject to the bank's policy ceiling for this method.

04Method 2: MPBF (Tandon Committee)

The Tandon Committee (1975) introduced Maximum Permissible Bank Finance. Under the commonly used Method II, the borrower must fund 25% of total current assets from long-term sources (net working capital).

MPBF (Method II) = 75% of Current Assets − Other Current Liabilities
  • Other current liabilities exclude bank borrowings
  • Minimum NWC = 25% of total current assets
  • Method I: MPBF = 75% of (CA − OCL), a lighter test
MPBF Method II
Total current assets
₹100 lakh
Other current liabilities (creditors, etc.)
₹30 lakh
75% of current assets
₹75 lakh
MPBF = 75 − 30
₹45 lakh
Required NWC (25% of CA)
₹25 lakh

If the borrower's actual NWC is only ₹15 lakh, bank borrowing is ₹55 lakh (100 − 30 − 15) against an MPBF of ₹45 lakh. The ₹10 lakh excess must be brought down by raising long-term funds, or the limit is restricted to ₹45 lakh.

05Method 3: Cash budget

For businesses with seasonal or lumpy cash flows (sugar mills, contractors, educational institutions, service firms), a month-by-month cash budget shows the peak deficit. The limit is set to cover the peak deficit, with margin, and is often sanctioned with peak and non-peak levels.

06Drawing power and monitoring

The sanctioned limit is the ceiling; what the borrower can actually draw at any time is the drawing power, computed from the latest stock and book-debt statement after deducting margins and unpaid creditors.

Drawing power
Stock as per statement
₹60 lakh
Less unpaid creditors for stock
₹15 lakh
Paid stock
₹45 lakh
Less 25% margin
₹11.25 lakh
DP from stock
₹33.75 lakh
Book debts up to 90 days ₹30 lakh less 40% margin
₹18 lakh

Total DP ₹51.75 lakh, but drawing is limited to the sanctioned limit if that is lower.

07Key terms explained

Drawing power

The amount a borrower can draw at a time from a working capital limit, based on current assets less margins.

Margin

The share of current assets the borrower funds from its own resources; it protects the bank against value erosion.

Net working capital

Current assets minus current liabilities; the long-term funds supporting current assets.

Stock audit

An independent check of stocks and receivables reported by the borrower, to verify drawing power.

Cash budget

A month-by-month projection of cash inflows and outflows used to assess seasonal working capital needs.

Case study: The distributor whose cycle stretched

A pharmaceutical distributor's receivable days rose from 40 to 75 after it started supplying to hospitals that pay late. Its cash credit stayed fully drawn and it began delaying supplier payments.

  1. The officer recomputed the operating cycle: it had grown by about 35 days.
  2. Turnover was the same, so working capital need had risen, but the business had no extra margin.
  3. The bank enhanced the limit partly, with a book-debt sub-limit capped at 90-day receivables, and asked the promoter to bring additional capital.

Lesson: Changes in the operating cycle show up before default. Track receivable and payable days every quarter, not just at renewal.

Illustrative case. Names and figures are invented for learning.

Common mistakes to avoid

  • Using turnover method for large, complex borrowers where MPBF or cash budget is more suitable.
  • Allowing drawings against stock that has not been paid for.
  • Accepting book debts older than the bank's policy limit.
  • Ignoring a falling NWC, which signals short-term funds used for long-term purposes.

Exam and interview angle

  • Tandon Committee (1975): MPBF Methods I, II, III. Chore Committee (1979): cash credit discipline.
  • Nayak Committee: turnover method, 25% of turnover, 20% bank finance, 5% margin.
  • Be ready to compute operating cycle and MPBF from a balance sheet extract.

Frequently asked questions

What is the difference between gross and net working capital?

Gross working capital is total current assets. Net working capital is current assets minus current liabilities, the part funded from long-term sources.

Why is NWC important to banks?

It shows the borrower's own stake in current assets and provides a cushion for the bank.

What is a stock audit?

An independent check of the stock and receivables reported, usually required for larger limits as per bank policy.

Test yourself

5 questions. Pick an answer to see the explanation.

Q1. RM 25 days, WIP 5, FG 15, receivables 40, payables 30. Operating cycle is:

Q2. Under the turnover method, bank finance is:

Q3. Current assets ₹200 lakh, OCL ₹50 lakh. MPBF under Method II:

Q4. MPBF was recommended by:

Q5. Drawing power is based on:

Facts used in this guide

FactSourceAs of
Methods of assessment and ceilings are set by bank loan policyRBI deregulation of working capital assessment; bank policy9 Nov 2026
Worked examplesIllustrative, prepared by Clerk2Officer-

Rules, limits and rates change. Check the current official text before using any figure for an operational decision.

Official sources

Clerk2Officer guides are educational. They do not replace RBI directions, your bank's circulars or professional advice.