At a glance

  • DSCR = cash available for debt service ÷ debt service due in the same period.
  • Numerator (common practice): PAT + depreciation + other non-cash charges + interest on term loan.
  • Denominator: term loan instalments + interest on term loan for the year.
  • DSCR of 1.00 means every rupee of cash goes to the bank, with no cushion.
  • The acceptable level is set by each bank's loan policy, not by RBI. Look at both the average and the minimum year.

You will learn

  • The DSCR formula and why each item is added back
  • Calculating year-wise, average and minimum DSCR from projections
  • How to read a weak year and what structuring options exist
  • Where DSCR fits with other ratios: FACR, TOL/TNW, current ratio
  • Common errors in projections that inflate DSCR

01What DSCR measures

A term loan is repaid from the cash the business earns, not from its profit figure on paper and not from the security. The Debt Service Coverage Ratio asks a simple question: for each rupee the borrower has to pay the bank in a year (instalment plus interest), how many rupees of cash will the business generate?

That is why DSCR is the central ratio in term loan appraisal, project finance and commercial real estate lending. Working capital limits are judged mainly by the operating cycle and liquidity ratios; term loans are judged by DSCR, because the repayment is spread over several years of future earnings.

DSCR = (PAT + Depreciation + Non-cash charges + Interest on term loan) ÷ (Term loan instalments + Interest on term loan)
  • PAT: profit after tax for the year
  • Depreciation and amortisation: non-cash, so added back
  • Interest on term loan: added back in the numerator because it is also paid out of the same cash and appears in the denominator
  • Instalments: principal repayment falling due in the year

02Why each item is added back

ItemWhy it is in the numeratorCommon mistake
Profit after taxThe surplus left after all expenses and taxesUsing profit before tax and ignoring tax outgo
DepreciationCharged in the P&L but no cash leaves the businessAdding depreciation on assets not yet acquired
Other non-cash chargesPreliminary expenses written off, provisions not paid in cashAdding back items that were actually paid
Interest on term loanIt was deducted to arrive at PAT, but it is a debt service payment being testedAdding back interest on working capital too, then not putting it in the denominator

03Worked example: a five-year term loan

A manufacturing unit takes a term loan of ₹100 lakh at 10% for machinery, repayable in 5 equal annual principal instalments of ₹20 lakh after a moratorium. Projected figures (₹ lakh):

Year-wise DSCR (₹ lakh)
YearPATDepreciationInterest on TLCash availablePrincipalDebt serviceDSCR
Year 114.015.010.039.020.030.01.30
Year 218.013.08.039.020.028.01.39
Year 322.011.06.039.020.026.01.50
Year 425.09.54.038.520.024.01.60
Year 527.08.02.037.020.022.01.68
Reading the result
Total cash available (5 years)
₹192.5 lakh
Total debt service (5 years)
₹130.0 lakh
Average DSCR (total ÷ total)
1.48
Minimum DSCR
1.30 in Year 1

The average looks comfortable, but Year 1 is the tightest. A 15% fall in Year 1 cash (₹39 lakh to ₹33.2 lakh) would bring DSCR to about 1.11.

04How to interpret the number

Below 1.00Cash shortfall

The business cannot meet the bank from its own cash. Repayment depends on fresh capital, other income or restructuring.

About 1.00 to 1.20Thin cushion

Any delay in sales or rise in costs causes overdue instalments. Needs strong mitigants.

Around 1.25 to 1.50Commonly expected range

Many bank policies look for an average in this range, with a floor for the minimum year. The actual benchmark is set by each bank.

Very highCheck, do not celebrate

Very high DSCR may mean optimistic projections, or a repayment schedule that is too long for the cash flows.

05When the DSCR is weak: structuring options

  1. 1
    Test the projections firstCompare projected sales with past trend, installed capacity and order book. Stress test price, volume and cost.
  2. 2
    Match the repayment to the cash flowA suitable moratorium, ballooning (lower early instalments, higher later) or a longer tenor within the asset's useful life.
  3. 3
    Increase the cushionHigher promoter contribution reduces the loan and the instalment. Debt Service Reserve Account (DSRA) for large projects.
  4. 4
    Protect the cashEscrow or TRA for receivables, covenants on dividend and further borrowing, monitoring of DSCR from audited results each year.

06DSCR alongside other credit ratios

RatioWhat it tells youFormula (simplified)
DSCRCan cash flows service term debt?Cash available ÷ debt service
Interest coverage ratioCan operating profit cover interest?EBIT ÷ interest
FACR (fixed asset coverage)Security cover on fixed assetsNet fixed assets ÷ term loans
TOL/TNWLeverage: outside liabilities per rupee of net worthTotal outside liabilities ÷ tangible net worth
Current ratioShort-term liquidityCurrent assets ÷ current liabilities
Break-even pointSales needed to cover all costsFixed costs ÷ contribution margin ratio

No single ratio approves a loan. A strong DSCR with very high TOL/TNW means the borrower is leveraged; a good security cover with weak DSCR means the bank may end up recovering from security, which is the outcome lending is meant to avoid.

07Key terms explained

Debt service

The total amount a borrower must pay to lenders in a period: principal instalments plus interest. DSCR compares cash generated with this amount.

Moratorium

A period at the start of a loan when instalments (and sometimes interest) are not payable. It gives a project time to start generating cash, but interest usually accrues.

Ballooning

A repayment pattern with smaller instalments in early years and larger ones later. It is used when cash flows are expected to grow, but needs careful testing.

DSRA

A Debt Service Reserve Account holds funds equal to a few months of debt service. It protects the lender against temporary cash shortfalls in large projects.

Sensitivity analysis

Testing how DSCR changes if sales, prices or costs move by a set percentage. It shows how much margin of safety the loan really has.

Case study: The hotel project with a good average and a bad year

A ₹6 crore hotel renovation loan showed an average DSCR of 1.55 over 7 years. Year 1 DSCR was 0.92 because occupancy was projected to ramp up slowly, while full instalments started immediately after a 6-month moratorium.

  1. The officer noted that Year 1 cash would not meet debt service, despite the comfortable average.
  2. Occupancy assumptions were checked against two comparable hotels in the town.
  3. The repayment was restructured at sanction: 12-month moratorium and stepped instalments for Years 1 to 2.
  4. Revised minimum DSCR: 1.21 in Year 2; average 1.49.

Lesson: Always look at the minimum year, not only the average. Structuring the repayment to match the cash flow at sanction is cheaper than restructuring after default.

Illustrative case. Names and figures are invented for learning.

Common mistakes to avoid

  • Using PBT instead of PAT, or ignoring tax payable in later years after tax holidays end.
  • Adding back interest in the numerator without including it in the denominator.
  • Using projections that assume full capacity utilisation from Year 1.
  • Reporting only the average DSCR and hiding a weak year.
  • Forgetting existing term loans of the borrower when computing debt service.

Exam and interview angle

  • Be able to compute DSCR from a short table in under two minutes; exam data often includes a distractor such as working capital interest.
  • Know that DSCR is for term loans; working capital is assessed by turnover, MPBF or cash budget methods.
  • Interview: 'A unit shows DSCR 2.8. Would you be happy?' Explain why you would test the projections and tenor.
  • Understand average versus minimum DSCR and when each matters.

Frequently asked questions

Is DSCR calculated on projected or actual figures?

At sanction, on projected figures supported by past performance. During monitoring, recompute it from audited results every year and compare with the projections.

Should working capital interest be included?

It depends on the bank's appraisal format. The rule is consistency: include it in both numerator and denominator, or in neither.

What is DSRA?

A Debt Service Reserve Account holds a set number of months of instalments and interest, built from cash flows or promoter funds, so a temporary shortfall does not cause default. It is common in project and infrastructure loans.

Does a high DSCR mean the loan can be larger?

Not on its own. Loan size also depends on project cost, promoter margin, security, leverage and the bank's exposure norms.

Test yourself

5 questions. Pick an answer to see the explanation.

Q1. Which item is NOT added back to PAT in the DSCR numerator?

Q2. PAT ₹12 lakh, depreciation ₹8 lakh, TL interest ₹5 lakh, principal ₹15 lakh. DSCR is:

Q3. A DSCR of 1.00 means:

Q4. Who sets the minimum acceptable DSCR for an ordinary term loan?

Q5. Year 1 DSCR is 0.95 but the average is 1.50. The best first response is:

Facts used in this guide

FactSourceAs of
DSCR benchmarks for ordinary term loans are set by each bank's loan policy; RBI prescribes no single minimumBank credit policy practice9 Nov 2026
Worked example figuresIllustrative, prepared by Clerk2Officer-

Rules, limits and rates change. Check the current official text before using any figure for an operational decision.

Official sources

Clerk2Officer guides are educational. They do not replace RBI directions, your bank's circulars or professional advice.