CLERK2OFFICER · CAIIB BFM · TREASURY MANAGEMENT

Treasury Risk Management

P2-C05 · 2,564 teaching words · 25 explained questions

Module C contentsPrevious chapterNext chapter

Module C review edition · 7 November 2026. Original illustrative cases; not affiliated with IIBF. Source-version limits appear below.

1. Move from a position to its risk drivers

Treasury risk management connects market positions, counterparty obligations, funding and operational controls. A bond purchase can create interest-rate sensitivity, issuer exposure, settlement obligations and a refinancing need. A derivative can reduce one market exposure while creating collateral demands or counterparty risk. The first task is therefore to identify what the bank has promised and what can change its value or cash flows. A single product label or an aggregate profit number cannot explain the full risk of the activity.

Fictional Meridian Bank holds fixed-rate bonds, quotes foreign exchange to customers and uses interest-rate swaps. Its report shows a favourable daily profit, but independent risk notices a growing bond sensitivity and an unresolved trade confirmation. These facts need different responses. The sensitivity may require a position or hedge decision, while the confirmation issue requires operational investigation. Treating both as harmless because the day was profitable would confuse an outcome with the quality of the underlying risk process.

This chapter applies the risk concepts introduced in Module B to treasury decisions. It covers supervision, control, market and credit exposure, duration, value at risk and derivative use. Calculators use transparent educational models rather than claim to implement a complete regulatory capital method. The student should be able to explain the direction, units and limitations of a result. That explanation matters because a correct calculation can still support an unsuitable decision if the position, horizon or assumptions were misunderstood.

2. Establish an independent control structure

The board and senior management establish permitted activities, appetite and oversight. Treasury executes within delegated authority. Independent risk oversight challenges measures and monitors limits, while settlement and accounting functions confirm and reconcile transactions. Internal audit assesses the framework and its operation. Actual organisational names vary; the principle is a clear separation of conflicting duties with accountable decisions. An institution should not rely on one dealer to originate a position, value it, approve its limit and resolve every resulting reconciliation difference.

Independent valuation uses appropriate market evidence and controlled methods. A dealer's quote can be informative but may be influenced by incentives. Illiquid positions require particular attention because a small indicative quote may not represent an executable price for the full holding. Valuation adjustments and uncertainty should be visible to decision makers. A model can generate a precise number without reliable inputs, so the review should challenge data sources, assumptions and changes as well as arithmetic implementation.

Trade completeness is equally important. Late capture, duplicate records or unauthorised amendments can invalidate every subsequent risk calculation. Reconcile dealing systems, confirmations, accounting and settlement records, investigate material breaks and preserve an audit trail. Emergency access needs boundaries and review. A sophisticated risk report based on an incomplete position file can be less useful than a simple accurate report, because its apparent precision may discourage the questions that would reveal the missing exposure.

A risk number needs interpretationDirection and units come first. Duration is local; VaR is a quantile. Monitor residual risk and cash demands.A risk number needs interpretation1Identify position and driverDirection and units come first.2Measure, challenge and stressDuration is local; VaR is a quantile.3Control and reviewMonitor residual risk and cash demands.
A risk number needs interpretation. Direction and units come first. Duration is local; VaR is a quantile. Monitor residual risk and cash demands.

3. Design limits that match the exposure

Limits translate appetite into usable boundaries. Notional limits constrain size, position limits constrain net or gross exposure as defined, sensitivity limits constrain response to specified market movements, and counterparty limits constrain relevant credit exposure. VaR and stress limits add other views. A stop-loss threshold responds to a defined loss measure but does not guarantee execution at that amount. Each limit needs a definition, owner, measurement frequency and escalation process. A number without an action rule is weak operational guidance.

Suppose a desk has an assumed DV01 limit of INR5 lakh and current magnitude INR4 lakh. Utilisation is 80%, leaving INR1 lakh headroom under that measure. A proposed trade adding INR1.5 lakh sensitivity would raise the total to INR5.5 lakh if the sensitivities add in the stated scenario. The transaction should not proceed merely because notional headroom remains. Different limits address different dimensions, and passing one does not authorise a breach of another.

Warnings should permit action before a hard boundary is crossed. Breaches require timely explanation, containment and authorised resolution. Raising a limit retrospectively should not become routine loss avoidance or a means of hiding weak controls. Temporary exceptions need rationale, conditions and expiry. Management should also examine repeated near-breaches or rapid utilisation growth: a desk can become vulnerable before a formal breach occurs, particularly where liquidity deteriorates and the capacity to reduce exposure is shrinking.

4. Measure bond sensitivity with duration and DV01

Modified duration estimates the percentage price response to a small yield change. Approximate monetary change equals minus market value times modified duration times the yield change expressed as a decimal. For INR80 crore market value, duration 3.5 and a 20-basis-point yield rise, the change is minus 80 times 3.5 times 0.002, or minus INR0.56 crore. The negative sign describes the usual inverse price-yield relationship for the assumed fixed-rate position. It is not an arbitrary convention to discard after calculation.

DV01 is the approximate value change for one basis point, often reported as a positive magnitude. In the example, 80 times 3.5 times 0.0001 gives INR0.028 crore, or INR2.8 lakh per basis point. A twenty-basis-point rise therefore implies twenty times that magnitude of loss under the linear approximation. State both the monetary unit and reporting convention. Confusing one percentage point with one basis point creates a hundredfold error, while mixing lakh and crore can create another major scale error.

Duration is local and incomplete. A large shock, non-parallel curve movement, spread change or embedded option can cause actual revaluation to differ. A portfolio can have a small aggregate duration while retaining substantial exposure to the relative movement of different maturities. Use bucketed sensitivities or suitable full revaluation where needed. The simple tool teaches the first-order relationship; it should not be presented as a complete pricing engine for callable bonds, structured instruments or a stressed yield curve.

Follow the process

No autoplay. Read each step, or use Play, Pause and Next. Reduced-motion settings remove transitions.

Identify position and driver

Direction and units come first.

Measure, challenge and stress

Duration is local; VaR is a quantile.

Control and review

Monitor residual risk and cash demands.

All steps are available above.

5. Build a hedge using sensitivity rather than face value

A hedge should address the exposure's economic driver. Equal face values do not ensure equal and opposite sensitivity. Suppose an asset portfolio has DV01 magnitude INR2.8 lakh and one hedge contract provides INR0.07 lakh of opposite DV01. A simplified full sensitivity hedge requires forty contracts. The direction of the hedge must be established separately. For a long fixed-rate bond position harmed by rising yields, an appropriate short price exposure may offset part of that sensitivity under the assumed relationship.

Rounding can leave residual risk. If the ideal contract count is 40.4 but only whole contracts are available, compare forty and forty-one using the resulting net sensitivity and policy. The choice should not be made solely by rounding to the nearest integer without considering over-hedging constraints or other exposures. A hedge also needs liquidity, documentation, counterparty and margin assessment. A reduction in DV01 can coexist with greater cash demands if the derivative requires collateral before the asset's economic benefit is realised.

Basis risk remains when the hedge and asset do not move identically. Different reference rates, maturities, credit spreads or deliverable instruments can weaken the offset. Monitor the combined position and reassess when the underlying changes. If a bond is sold but its hedge remains, the derivative can become a new exposure. A hedge register should therefore connect the transaction to its objective, amount, horizon and review conditions rather than treat an initial approval as permanent evidence of effectiveness.

6. Interpret VaR as a conditional quantile

Value at risk describes a loss threshold for a specified horizon and confidence level under a model. A one-day 99% VaR of INR2 crore means the model assigns about 1% probability to exceeding that loss over a day. It is not a maximum loss, an average daily loss or a guarantee that a position can be closed at the threshold. Always name the portfolio, horizon, confidence and method. Without those details, comparisons between two VaR numbers can be meaningless.

For a zero-mean normal-return illustration, portfolio value INR100 crore and daily volatility 1% give a one-day 99% VaR of approximately INR2.32635 crore. The formula multiplies value, decimal volatility and the normal quantile 2.32635. Under independent identically distributed daily returns and constant volatility, ten-day scaling uses the square root of ten, producing approximately INR7.35656 crore. Multiplying by ten assumes a different relationship. The stated shortcut should not be extended automatically to serial dependence, changing volatility or nonlinear portfolios.

Parametric, historical and simulation methods depend on different modelling choices. Historical simulation still assumes that the selected past movements are informative. Monte Carlo requires a suitable model and reliable revaluation; more paths do not repair a bad specification. Model governance should cover data, conceptual validity, implementation and use. A simple transparent measure with understood limitations can support better decisions than a complex estimate whose users cannot explain what loss distribution or position set it represents.

Work the cases yourself

7. Challenge estimates with outcomes and stress

Backtesting compares forecasts with realised outcomes under a defined profit-and-loss measure. A 99% daily model does not require exactly one exception in every hundred observations. Counts vary, and patterns matter. Investigate whether exceptions arise from market behaviour, data errors, new trades, valuation differences or use outside the model's intended scope. An apparently good exception count does not prove that every assumption is sound, especially if the observation period contains little stress or the portfolio changes materially.

Stress testing examines specified adverse conditions beyond routine estimates. A coherent treasury scenario might combine a yield rise, currency movement, widening spreads, lower market depth and larger collateral calls. Explain the economic links before calculating. A random collection of unrelated worst observations can be difficult to interpret, while mild recent history can understate vulnerability. Show results before and after feasible management actions, and do not assume that a large position can be sold instantly at its previous mid-market valuation.

Reverse stress testing starts from a critical outcome such as exhausting a loss allowance or available liquidity and asks what conditions could cause it. This is a vulnerability analysis, not a prediction of certain failure. It can reveal dependence on one market relationship or funding source. Management should identify early warnings and actions with credible authority, capacity and timing. A scenario report that produces no changes or follow-up may add information without improving the institution's ability to respond.

8. Measure counterparty exposure separately

Treasury credit risk includes issuer risk on securities, interbank exposure and derivative counterparty risk. A positive derivative replacement value represents an amount potentially lost if the counterparty fails, subject to the applicable netting, collateral and exposure method. Future market changes can increase exposure. Notional principal is a reference amount and should not automatically be treated as current loss. Conversely, a zero-value contract at inception can still create substantial future exposure and cash obligations.

Suppose Meridian has a positive replacement value of INR3 crore and an explicitly assumed future-exposure add-on of INR2 crore in a simplified teaching case. Gross illustrative exposure is INR5 crore before any recognised offsets. If eligible collateral of INR1 crore is applied under the supplied model, residual exposure is INR4 crore. This is not a complete regulatory method. Legal enforceability, margin timing, disputes, wrong-way risk and the governing exposure rules need separate assessment before a real capital or limit calculation.

Wrong-way risk occurs when exposure increases as the counterparty's credit quality worsens. A hedge can be least reliable when needed if its provider is closely linked to the same adverse driver. Collateral can also lose value in the same scenario. Counterparty assessment should therefore examine common dependencies rather than assume that a contract with another institution necessarily diversifies risk. Limits, documentation, collateral practices and monitoring work together; none alone guarantees collection after a default.

A linear sensitivity checkSame-direction addition 1.5 lakh. Utilisation becomes 86%; other constraints still require review. [('Current DV01, lakh', 2.8), ('After proposed addition', 4.3), ('Assumed limit', 5)]A linear sensitivity checkCurrent DV01, lakh: 2.8After proposed addition: 4.3Assumed limit: 5
Same-direction addition 1.5 lakh. Utilisation becomes 86%; other constraints still require review.

9. Incorporate trading and funding liquidity

Market liquidity determines the cost and time needed to reduce a position. A quoted price for a small quantity may not apply to the full holding. Bid-ask spreads, market depth and concentration affect achievable proceeds. If a bank must sell quickly, the loss can exceed a model based on ordinary daily price changes. Reports should distinguish marked value from estimated stressed execution value and identify assets that are unavailable because of encumbrance or settlement commitments.

Funding liquidity concerns cash needed to maintain or settle positions. A hedge that stabilises eventual economic value can require margin today. A bond financed overnight may face rollover pressure even when its market price is unchanged. Treasury should connect price stress with collateral, funding and payment schedules. A position can be economically sensible over its horizon but impossible to hold through an interim cash squeeze. This is why market-risk mitigation and liquidity planning must be reviewed together rather than by disconnected reports.

For an illustrative marked holding of INR50 crore, a 3% stressed discount and INR0.10 crore execution cost imply proceeds of INR48.40 crore. The INR1.60 crore reduction is separate from any loss already recognised in the mark; avoid double counting the same price movement. State the starting valuation and scenario assumptions clearly. A stress calculation should explain whether the discount represents additional execution cost, a market shock or both, so that users can reconcile it with other reported losses.

10. Report decisions and residual risk

A treasury report should connect exposure, limits, changes, causes and required actions. Include significant sensitivities, counterparty positions, VaR or approved measures, stress results, liquidity assumptions and unresolved exceptions. A large gain can conceal a growing risk, while a loss can arise from an authorised hedge offset by an underlying benefit elsewhere. Profit attribution and risk reporting should therefore reconcile across the relevant perimeter. Neither an isolated derivative gain nor an isolated trading loss is enough to judge hedge effectiveness.

Model and limit changes need controls. A change that lowers measured risk should be independently reviewed before it creates apparent headroom for more business. Preserve the prior method, rationale, testing and approval. Staff should know when a model is unsuitable and which fallback applies. A report that silently changes definitions across periods can make a trend look favourable without any economic improvement. Clear documentation supports both operational use and later examination of the decisions made under uncertainty.

For revision, identify the position and driver, establish the units, select a suitable measure, calculate and interpret, then test the limitations and response. Duration is a local approximation, VaR a modelled quantile and a hedge a conditional offset. Counterparty and liquidity exposures remain even when market sensitivity falls. A strong case answer explains the result and the action it supports, while recognising what further information is required before the bank can approve or maintain the position.

11. Conduct a morning risk review

Meridian's desk proposes increasing its bond holding after a quiet week. Current DV01 is INR2.8 lakh against an assumed INR5 lakh limit. The proposed addition contributes INR1.5 lakh, producing INR4.3 lakh and 86% utilisation if sensitivities add. That passes this particular limit, but the review should also examine concentration, stress loss, funding and settlement capacity. A quiet week may lower historical volatility without reducing the consequences of a large yield movement. Available headroom is permission to consider a trade, not proof that it is desirable.

If the bank chooses to hedge part of the addition, calculate the opposite sensitivity and examine basis risk and margin needs. Record the intended combined exposure rather than only the number of contracts. Independent risk should verify the inputs, while operations confirms that documentation and settlement arrangements support the plan. Any unresolved confirmation or data issue should be addressed before it undermines the position report. Risk management relies on a complete transaction record as well as sound models.

The final recommendation should specify position size, limits, hedge objective, residual exposure and review triggers. After execution, compare actual positions and cash flows with the approved plan. Investigate differences and reassess if market depth, funding or the underlying exposure changes. This closes the loop from identification to control and reporting. The calculators provide a way to practise sensitivity, hedge sizing, VaR, counterparty exposure and stressed proceeds, but their outputs remain useful only when the assumptions fit the actual treasury decision.

25 original questions

Choose one best answer. Explanations address the answer and distractors; no negative marking.

Browser-local saving is optional.

1. A profitable day proves what about treasury controls?
Answer and detailed reasoning

Correct: A. No automatic conclusion of control effectiveness

Profit is an outcome that can coexist with weak controls or omitted trades. Authority, confirmations and completeness need evidence of their own; a gain cannot certify those processes.

2. Why separate dealing and independent valuation?
Answer and detailed reasoning

Correct: A. To challenge conflicts and unreliable prices

Independent valuation challenges data and incentives. It cannot control market direction, discharge obligations or replace exposure boundaries; it supports a reliable position and performance assessment alongside other controls.

3. An indicative quote for a small lot may fail to represent what?
Answer and detailed reasoning

Correct: A. Executable value for the full position

Quote size and depth matter to achievable proceeds. The quote can still be informative, but it does not automatically establish full-size liquidity; this limitation does not change currency or eliminate the underlying driver.

4. Current DV01 4 lakh against limit 5 lakh gives utilisation of?
Answer and detailed reasoning

Correct: B. 80%

Utilisation is 4/5×100=80%. Twenty is unused proportion, the reciprocal reverses the relationship, and five confuses the limit amount with a percentage. Other applicable constraints still need checking.

5. A trade adds 1.5 lakh DV01 to that 4 lakh position, with additive sensitivity. Result is?
Answer and detailed reasoning

Correct: A. 5.5 lakh, above the supplied limit

Adding the stated same-direction sensitivity gives 5.5, exceeding five. Subtracting assumes an opposite hedge not supplied; retaining four or using the increment alone omits part of the combined position.

6. Value 80 crore, duration 3.5, yield rise 20 bp gives approximate change of?
Answer and detailed reasoning

Correct: A. Minus INR0.56 crore

Apply -80×3.5×0.002=-0.56 crore. The positive answer reverses direction, fifty-six mis-scales basis points, and zero ignores fixed-rate sensitivity. The result remains a first-order approximation. A non-parallel curve shift requires additional sensitivity information.

7. The same portfolio's DV01 magnitude is?
Answer and detailed reasoning

Correct: A. INR2.8 lakh

Value×duration×0.0001 gives 0.028 crore, equal to 2.8 lakh. The other amounts confuse decimal conversion or crore/lakh units, errors that can materially distort hedge sizes and limit reports.

8. A small aggregate duration can conceal what?
Answer and detailed reasoning

Correct: B. Yield-curve bucket and basis exposures

Offsetting aggregate sensitivity can leave different maturities moving unfavourably. Duration does not prove immunity, erase cash flows or resolve valuation uncertainty, so richer analysis may be needed for the actual portfolio.

9. Portfolio DV01 2.8 lakh and opposite contract DV01 0.07 lakh imply how many simple hedge contracts?
Answer and detailed reasoning

Correct: D. 40

Divide the exposure magnitude by per-contract opposite sensitivity: 2.8/0.07=40. The other choices reverse the ratio or introduce scale errors. Direction, basis and whole-contract constraints still require assessment.

10. An ideal hedge count of 40.4 requires what before choosing a whole number?
Answer and detailed reasoning

Correct: B. Compare residual exposure and policy for adjacent counts

Rounding changes residual or over-hedged exposure. Policy and other positions matter; automatic rounding or assuming fractional contracts can create an unintended position even when the ideal continuous calculation is correct.

11. A hedge remains after the underlying bond is sold. What may occur?
Answer and detailed reasoning

Correct: D. A new standalone exposure

The offset can disappear when the underlying changes. Contracts do not necessarily cancel automatically, so the remaining derivative needs reassessment, authority and monitoring rather than continued classification as an unchanged hedge.

12. One-day 99% VaR describes what?
Answer and detailed reasoning

Correct: D. A modelled loss threshold with about 1% exceedance probability

VaR is a conditional quantile for a defined horizon and model. It does not establish a maximum, executable exit or mean profit, and losses beyond it remain possible.

13. Value 100 crore, daily volatility 1% and 99% normal quantile 2.32635 give what?
Answer and detailed reasoning

Correct: A. INR2.32635 crore

Use 100×0.01×2.32635. One crore is one standard deviation rather than the selected quantile; the larger and smaller alternatives mis-convert percentage volatility or monetary scale. Losses beyond this threshold remain possible under the model.

14. Square-root-of-time scaling requires which simplifying assumption?
Answer and detailed reasoning

Correct: B. Independent returns with constant relevant volatility

Variance addition under the specified return assumptions supports the shortcut. Identical losses, frozen markets and unlimited liquidity are neither the model nor guarantees; dependence and changing volatility can invalidate scaling.

15. A Monte Carlo estimate can be precisely wrong when?
Answer and detailed reasoning

Correct: B. The model or exposure mapping is unsuitable

Many paths reduce simulation noise, not conceptual error. Documentation and generator tests are useful safeguards, but model suitability and correct position mapping remain essential to a meaningful estimate.

16. Backtesting needs a defined realised P&L measure because?
Answer and detailed reasoning

Correct: A. Forecast and outcome must be comparable

Differences in positions, trading and valuation can affect outcomes. Defining the comparison avoids false conclusions; it does not assume those differences vanish or that every reported profit measures the modelled portfolio.

17. Exactly one exception every hundred days is required by 99% VaR?
Answer and detailed reasoning

Correct: C. No, realised sample counts vary

Probability gives a long-run model expectation, not a fixed sample count. Exceptions can vary or cluster; investigation should assess patterns and causes rather than apply an impossible deterministic rule.

18. A coherent stress scenario should include what?
Answer and detailed reasoning

Correct: D. Economically linked shocks and feasible actions

Linked assumptions make results interpretable. Arbitrary maxima, unchanged execution prices in illiquidity and unlimited funding can contradict the scenario or hide dependencies, preventing a realistic assessment of response capacity.

19. Reverse stress testing begins with what?
Answer and detailed reasoning

Correct: B. A critical outcome and conditions that could produce it

Reverse analysis identifies vulnerabilities by working backwards. It is neither a failure prediction nor a routine favourable forecast, and its scope can extend beyond recent volatility observations to combined adverse mechanisms.

20. Positive replacement value 3 plus assumed add-on 2 crore gives gross illustrative exposure of?
Answer and detailed reasoning

Correct: C. INR5 crore

The supplied model adds current and future components to get five. Subtraction or selecting one component omits exposure. This simple exercise does not establish a complete regulatory derivative exposure methodology.

21. Eligible collateral 1 crore against that 5 crore model exposure leaves what?
Answer and detailed reasoning

Correct: D. INR4 crore

Under the supplied subtraction model, residual exposure is four. Adding collateral reverses its role, full elimination overstates protection, and one is the collateral amount rather than the remaining exposure.

22. Wrong-way risk means what?
Answer and detailed reasoning

Correct: A. Exposure rises as counterparty quality worsens

Adverse dependence can weaken protection when needed. It does not imply every hedge fails or that prices and collateral are fixed; it requires analysing linked drivers, provider capacity and collateral behaviour.

23. A market hedge can still create a funding problem because?
Answer and detailed reasoning

Correct: B. Margin may be due before underlying benefits are realised

Economic and cash-flow timing differ. A hedge may reduce eventual price risk while requiring interim resources; neither guaranteed gain-first ordering nor unlimited collateral stability follows from the hedge objective.

24. Marked value 50 crore, additional discount 3%, costs 0.10 give proceeds of?
Answer and detailed reasoning

Correct: D. INR48.40 crore

Discounted value is 48.5 and costs reduce it to 48.4. One point six is the reduction from mark; omitting costs or adding deductions gives the other incorrect interpretations.

25. A method change lowers measured risk. What should follow before using new headroom?
Answer and detailed reasoning

Correct: C. Independent review, testing and approval

Changed measurement can create artificial headroom. Controlled validation and records are needed; immediate growth or erased history prevents comparison, and favourable profit does not establish conceptual or implementation correctness.

Ready: 25 questions.

Sources and version notes

Prepared 7 November 2026. Review edition; independent academic approval and current rule-consolidation verification remain pending. Original examples are illustrative. External source links require internet.

Module C contentsPrevious chapterNext chapter