CLERK2OFFICER · CAIIB BFM · TREASURY MANAGEMENT

International Equity and Debt Products

P2-C03 · 2,672 teaching words · 25 explained questions

Module C contentsPrevious chapterNext chapter

Module C review edition · 7 November 2026. Original illustrative cases; not affiliated with IIBF. Source-version limits appear below.

1. Begin with the issuer and investor perspectives

International finance connects an issuer seeking resources with investors or lenders in another market. The instrument can represent ownership, debt or a combination with conversion features. Identify who raises money, who supplies it, which currency denominates the obligation and where cash will be generated for repayment. These questions matter more than the location of a listing alone. An international issue can broaden access while introducing currency, legal, disclosure and settlement requirements that do not arise in the same form for a purely domestic transaction.

Consider fictional Aster Engineering, an Indian company planning a new factory. It compares an overseas equity-linked route, a foreign-currency loan and a rupee-denominated overseas bond. Each can raise resources, but the consequences differ. Equity can dilute ownership; debt creates contractual payments; currency denomination allocates exchange-rate exposure. Treasury should compare consistent net proceeds and future cash flows, then separately establish regulatory eligibility. A low quoted cost cannot establish permission, and permission cannot establish that the financing is commercially sensible for the company.

This chapter covers the regulatory environment, global and Indian depository receipts, external commercial borrowing, trade credit and rupee-denominated bonds. It teaches original conceptual explanations and transparent examples. Detailed current thresholds are not inferred from older summaries. The research located changes to the borrowing framework and a later index consolidation whose full operative text was not completely available. Consequently, examples explicitly supply their assumptions and the source register identifies the remaining current-rule verification item rather than presenting an obsolete route checklist as current certification.

2. Separate equity from debt

Equity investors generally participate in ownership and residual returns, while debt investors hold contractual claims according to the instrument's terms and priority. Equity proceeds do not create the same scheduled principal repayment as a conventional loan, but they can dilute existing shareholders and impose governance or disclosure obligations. Debt can preserve ownership while increasing leverage and refinancing pressure. Neither is universally cheaper or safer. The issuer's cash generation, control preferences, market access and capacity to absorb adverse outcomes influence the appropriate mix.

Suppose Aster has ten million existing shares and raises funds by issuing two million new shares under a simplified exercise. Existing holders collectively retain ten divided by twelve, or approximately 83.33%, of the enlarged share count. Their percentage ownership falls even if the money funds a valuable investment. This is dilution of proportionate ownership, not automatically destruction of economic value. The issue price, project returns and rights attached to the shares determine the wider effect. Do not equate a lower ownership percentage with a guaranteed lower investment value.

For debt, map coupon, fees, principal schedule and any option to repay or convert. A bullet maturity concentrates repayment at one date; amortisation distributes it across dates. Floating-rate debt exposes the issuer to benchmark changes unless effectively offset. A convertible instrument combines debt obligations with defined conversion rights and cannot be analysed as ordinary equity from inception merely because conversion might eventually occur. Read the actual terms and applicable treatment before calculating cost, ownership effects or regulatory eligibility.

International funding has two gatesEquity, debt and receipts differ. Include fees, currency and repayment dates. Permission and cost are separate questions.International funding has two gates1Map proceeds and claimsEquity, debt and receipts differ.2Test economics and stressInclude fees, currency and repayment dates.3Verify operative conditionsPermission and cost are separate questions.
International funding has two gates. Equity, debt and receipts differ. Include fees, currency and repayment dates. Permission and cost are separate questions.

3. Explain the depository-receipt structure

A depository receipt represents an interest in underlying securities through a depository and custody arrangement. The investor deals in the receipt while the underlying securities are held within the prescribed structure. The receipt-to-share ratio determines the economic units represented. This arrangement can make an issuer's securities accessible in another market, but it does not create a second independent company or guarantee investment value. Rights, fees, distributions, conversion and cancellation depend on the governing documents and applicable rules.

For an illustrative global depository receipt, assume each receipt represents four ordinary shares. An issue of one million receipts therefore represents four million underlying shares. If each receipt is issued at USD12, gross proceeds are USD12 million before fees. A comparison with the domestic share price must use the ratio and a consistent exchange rate. Dividing the receipt price by four gives USD3 per underlying share before considering costs and any market or legal differences that prevent a simple arbitrage.

The custodian, depository, issuer and investor have distinct roles. The issuer's corporate obligations do not disappear because another institution administers receipts. The investor should understand voting arrangements, distribution handling and the conditions for conversion or cancellation. Treasury should also consider where proceeds are held and how they are deployed or converted. A listing venue can affect access and disclosure, but it should not be treated as a substitute for analysing the underlying issuer's business and financial condition.

4. Distinguish GDRs and IDRs

A global depository receipt is associated with access to overseas investors through a depository-receipt structure. An Indian depository receipt provides an Indian-market receipt structure connected to underlying shares of a foreign issuer under the applicable Indian framework. The direction of the underlying issuer and market access is therefore important. An IDR should not be described simply as an Indian company's foreign-currency loan. Its economic nature involves an interest in equity securities through the prescribed arrangement, not a conventional promise of principal repayment.

Assume an illustrative IDR represents one-tenth of a foreign share. Ten receipts then represent one underlying share. If the share is valued at USD50 and the supplied exchange rate is INR84 per USD, the simple underlying value per receipt is INR420 before costs and market differences. This is an equivalence exercise, not an executable price or claim that actual receipts always trade at exact parity. Restrictions, fees, liquidity and investor demand can affect observed prices and conversion opportunities.

Regulatory analysis should establish issuer eligibility, issuance conditions, investor access, disclosure and the handling of underlying securities. The relevant authorities and instruments depend on the structure. Do not import a rule from a debt instrument merely because both involve foreign parties. Similarly, a receipt ratio changes the number of underlying shares represented but not the issuer's business risk by itself. For revision, draw the issuer, custodian, depository and investor chain, then annotate the cash and securities movements separately.

Follow the process

No autoplay. Read each step, or use Play, Pause and Next. Reduced-motion settings remove transitions.

Map proceeds and claims

Equity, debt and receipts differ.

Test economics and stress

Include fees, currency and repayment dates.

Verify operative conditions

Permission and cost are separate questions.

All steps are available above.

5. Understand external commercial borrowing

External commercial borrowing, or ECB, concerns borrowing under the applicable cross-border framework by an eligible borrower from a recognised lender. It can take different permitted forms and currencies, subject to the governing rules. The key analytical fields include borrower and lender status, denomination, maturity, use of proceeds, cost, security, hedging and reporting. These fields are connected: an apparently suitable loan can fail a material condition even when several other conditions are satisfied. A checklist should test each required element rather than stop after identifying a low interest rate.

The research retrieved a February 2026 RBI consolidation containing substantial deletions in the older ECB section and located an official index indicating an 8 September 2026 consolidation. It also identified the February 2026 amendment to the borrowing regulations. These observations are a warning against copying an older ECB table into a current chapter. This lesson therefore explains the assessment method without claiming that every historical threshold remains operative. The exact current route, limits and reporting conditions require the latest governing text for the transaction date.

For Aster, a dollar loan creates a dollar repayment obligation even if the factory earns rupees. Compare the loan with the currency and timing of operating cash. A natural hedge may exist where reliable dollar receipts match payments, but gross export sales alone do not prove a complete match. Costs, timing and competing dollar obligations matter. A financial hedge can reduce currency uncertainty while adding premiums, spreads, collateral or rollover needs. The financing decision should assess the combined debt-and-hedge package rather than the coupon alone.

6. Calculate borrowing cost consistently

For a one-year bullet illustration, assume a USD1 million loan with a 5% coupon and USD10,000 upfront fee deducted from disbursement. Net proceeds are USD990,000 and repayment is USD1,050,000. The simple one-year cost on net proceeds is 60,000 divided by 990,000, or approximately 6.0606%. Calling the cost 5% ignores the fee. This economic calculation does not itself determine compliance with a legal all-in-cost definition, which may specify included and excluded items differently.

Currency can change the domestic cost. At INR84 per USD, net proceeds translate to INR83.16 million. If repayment occurs at INR87 per USD without a hedge, the rupee payment is INR91.35 million. The one-year difference divided by net rupee proceeds is approximately 9.8485%. If a contractual hedge fixes another rate, use that rate and include the relevant hedge costs consistently. A favourable future exchange rate could reduce realised cost, but an unhedged forecast is not a guaranteed financing advantage.

For instalment loans, a single coupon comparison can be misleading because principal outstanding changes over time. Weighted average maturity uses principal repayments as weights in a simple teaching calculation. Repaying 60% after one year and 40% after four years gives 0.6 times one plus 0.4 times four, or 2.2 years. This arithmetic is not a full legal maturity assessment unless the applicable definition matches the exercise. Interest payments are not automatically principal weights, and calendar dates require consistent treatment in a detailed calculation.

Work the cases yourself

7. Distinguish trade credit from general finance

Trade credit finances a qualifying trade transaction under the relevant framework. Supplier's credit arises when the overseas supplier allows deferred payment; buyer's credit involves financing arranged from another lender for the buyer's payment obligation. The commercial and financing relationships differ even when both support the same import. Identify who pays the supplier, who becomes the lender and when the importer must repay. A diagram of goods, money and debt obligations is more reliable than treating every deferred import payment as the same instrument.

Suppose machinery costs USD500,000 and an illustrative buyer's-credit arrangement pays the supplier now while the importer repays in ninety days. At a supplied simple annual rate of 6% and 360-day basis, interest is USD7,500. If a supplier instead quotes a deferred invoice of USD509,000 for the same period, compare the USD9,000 increment with the alternative financing costs and conditions. Include fees and matching dates before concluding that one route is cheaper. This example does not establish either route's current regulatory eligibility.

The underlying trade must remain genuine and documented. Financing terms should connect to the goods, payment evidence and relevant reporting. A low financing rate does not cure an impermissible import or fabricated invoice. The bank should also assess performance risk, currency exposure, lender conditions and any guarantee or security obligations. Trade credit can shorten the apparent cash gap today while creating a concentrated foreign-currency repayment later, so treasury should bring it into the maturity and currency forecasts rather than leave it only in the trade-finance file.

8. Analyse rupee-denominated overseas debt

A rupee-denominated overseas bond specifies contractual amounts in rupees even when international investors participate. This changes the allocation of currency exposure compared with a dollar-denominated loan. If the issuer earns rupees and owes fixed rupee amounts, the issuer does not face the same direct principal translation risk as with dollar debt. The investor's return in its own currency can still vary with the exchange rate. Denomination therefore matters, but it does not eliminate credit, refinancing or market risk.

Assume a foreign investor buys an illustrative INR84 million bond when INR84 equals USD1. Its initial dollar equivalent is USD1 million. If principal alone is repaid when the rate is INR90 per USD, INR84 million converts to approximately USD933,333.33, before coupons and costs. The issuer still pays the contractual rupee principal. This isolates investor currency exposure; it does not calculate total investment return. Coupons, purchase price, taxes and any investor hedge must be included for a complete comparison.

An issuer can still face indirect consequences of currency movements through imported inputs, demand or investor pricing. Investors may require a higher rupee yield to compensate for expected currency or liquidity risk. A bond's label does not establish a cheap funding source. Check the applicable issuance framework, investor eligibility, maturity and use-of-proceeds conditions, and compare net funding economics with domestic alternatives. The lesson is to identify which party bears each contractual exposure rather than claim that one denomination makes the whole transaction risk-free.

One-year debt: fee changes costUSD thousands; 10 fee deducted, 5% coupon. Cost on net funds = 60/990 = 6.0606%. [('Face loan, USD000', 1000), ('Net proceeds, USD000', 990), ('Repayment, USD000', 1050)]One-year debt: fee changes costFace loan, USD000: 1000Net proceeds, USD000: 990Repayment, USD000: 1050
USD thousands; 10 fee deducted, 5% coupon. Cost on net funds = 60/990 = 6.0606%.

9. Compare instruments with a common cash-flow table

Build a table with net proceeds, currency, payment dates, ownership effect, funding cost, hedge cost and residual risk. Equity and debt cannot always be ranked by one interest percentage because their claims differ. A depository-receipt issue may avoid scheduled debt service but dilute ownership; a loan may preserve control but require cash regardless of project performance. A rupee bond may shift direct currency exposure toward the investor while changing the required coupon. Compare these trade-offs against the issuer's objectives and capacity.

The project cash flows should drive the financing schedule. A factory that generates cash only after construction may struggle with immediate amortisation. A bullet loan may fit early cash needs but concentrate refinancing risk. A floating-rate structure may initially cost less yet expose debt service to future rates. Stress the proposed schedule using lower revenue, delayed completion, higher rates or adverse currency movements as relevant. Avoid combining favourable assumptions for every variable and presenting that result as the expected cost of a robust plan.

Regulatory and commercial assessments remain separate gates. Passing one does not compensate for failure of the other. Keep a source record with issuer, title, version, effective date and scope for every material prescription. If a rule cannot be verified, identify the specific unresolved field rather than insert an old number with a vague disclaimer elsewhere. For examination practice, the supplied case assumptions permit calculation; for an actual transaction, material missing conditions must be established before approval or execution.

10. Control execution and ongoing obligations

International financing continues after disbursement. Monitor principal and interest dates, currency resources, covenants, reporting and changes to the transaction. A conversion option, prepayment, lender transfer or restructuring can have legal and regulatory consequences. The bank should use controlled processes and current authority rather than assume that an originally permitted loan can be changed without further analysis. Retain the original terms and a traceable record of authorised amendments so that cash forecasts and reporting reflect the actual obligation.

Operational details can determine whether a payment arrives correctly. Verify beneficiary and correspondent instructions, calendars, cutoffs and available balances. A sent message is not the same as confirmed receipt. Reconcile settlement and investigate differences promptly. For depository receipts, distributions and corporate actions need accurate handling under the structure. For debt, missed reporting or an overlooked covenant can create consequences even when the borrower has enough money. Product knowledge must therefore connect to the responsibilities and evidence required throughout the instrument's life.

For revision, distinguish ownership from contractual debt, receipts from underlying shares, denomination from issuance location and economic cost from a rule-defined cost measure. Draw the parties and cash flows, calculate the stated example and explain the residual exposures. Preserve source dates and avoid memorising an obsolete threshold as a timeless product feature. This approach allows you to answer unfamiliar case questions by analysing the promise being made and the resources needed to honour it, rather than relying solely on a product abbreviation.

11. Review Aster's financing proposal

Aster's management prefers the loan with the lowest coupon. Treasury should expand the comparison to net proceeds, repayment profile, hedging and fees. Under the one-year example, a 5% dollar coupon becomes a 6.0606% dollar cost on net funds after the upfront fee, before currency effects. An equity route has no comparable coupon but changes ownership and investor claims. A rupee debt route changes currency allocation and pricing. The recommendation should explain these differences in terms management can connect to project cash generation.

Next test a delay in factory completion. Debt service may begin before operating receipts, requiring a credible bridge or revised structure. A forecast export stream may be smaller or later than the proposed dollar repayment. An unverified assumption of refinancing is not a sufficient solution. Quantify the stressed cash gap, identify available resources and record conditions for proceeding. The analysis should show how the structure behaves when the project is less successful than planned, not only when every forecast is achieved.

Finally, resolve current regulatory eligibility and responsibilities before execution. The chapter's numerical tools explain cost, maturity, receipt ratios and investor currency effects, but do not authorise an issuance or borrowing. A complete proposal combines the economic comparison with verified conditions, documentation, settlement arrangements and ongoing monitoring. That combination is the practical role of treasury in international financing: it connects market access with a financing structure the institution can understand, control and service through ordinary and adverse conditions.

25 original questions

Choose one best answer. Explanations address the answer and distractors; no negative marking.

Browser-local saving is optional.

1. Which question begins an international financing assessment?
Answer and detailed reasoning

Correct: C. Who owes what currency on which dates?

Participant, currency and timing establish the economic obligation. Marketing location, coupon alone and optimistic forecasts omit material repayment, ownership and regulatory considerations necessary for a meaningful financing comparison.

2. Equity differs from conventional debt because it generally represents what?
Answer and detailed reasoning

Correct: A. Ownership and residual claims

Equity participates in ownership and residual returns. Conventional debt creates contractual payment claims; an equity issue is not automatically a deposit or a guarantee of fixed coupon and principal payments.

3. Ten million old shares plus two million new shares leave old holders with what percentage?
Answer and detailed reasoning

Correct: D. 83.33% approximately

Existing holders own 10/12 of the enlarged count, about 83.33%. The other percentages use the wrong denominator, describe the new issue incorrectly or ignore dilution of proportional ownership.

4. Ownership dilution necessarily means what about economic value?
Answer and detailed reasoning

Correct: D. No guaranteed value loss follows from percentage alone

Value depends on issue price, rights and use of proceeds. A smaller ownership percentage can accompany a valuable investment; dilution alone neither proves destruction nor changes ordinary shares into debt.

5. A bullet loan creates which distinctive concern?
Answer and detailed reasoning

Correct: D. Concentrated principal repayment at maturity

A bullet concentrates principal at one date, potentially increasing refinancing needs. It remains debt, does not itself issue shares, and differs from instalments that distribute principal payments over time.

6. A depository receipt represents what?
Answer and detailed reasoning

Correct: D. An interest in underlying securities through a defined structure

The receipt links investors to underlying securities through depository and custody arrangements. It does not create a separate operating issuer, guarantee value or necessarily constitute conventional short-term borrowing.

7. One million receipts each represent four shares. Underlying share count is?
Answer and detailed reasoning

Correct: B. Four million

Multiply receipts by shares per receipt: one million times four. Dividing reverses the stated ratio; adding the counts or retaining the receipt count does not measure underlying shares represented.

8. One million receipts issued at USD12 raise gross proceeds of?
Answer and detailed reasoning

Correct: D. USD12 million

Receipt count times issue price gives twelve million dollars. The share ratio does not multiply proceeds again, and per-underlying-share equivalence is different from the total cash raised before fees.

9. A USD12 receipt representing four shares implies what per underlying share before differences?
Answer and detailed reasoning

Correct: C. USD3

Divide receipt price by represented shares: 12/4=3. Multiplication reverses the ratio, retaining twelve ignores it, and one-quarter is a quantity relationship rather than the price per underlying share.

10. An IDR conceptually connects an Indian-market receipt with what?
Answer and detailed reasoning

Correct: A. Underlying shares of a foreign issuer

The IDR structure concerns foreign underlying equity accessed through Indian receipts. A dollar loan, reserve balance and government bill have different issuers, claims and cash-flow structures, so they are not interchangeable definitions.

11. An IDR represents one-tenth of a USD50 share at INR84 per USD. Simple equivalent is?
Answer and detailed reasoning

Correct: D. INR420

The underlying share equivalent is 50×84=4,200 rupees; one-tenth is 420. Other answers omit or misapply the ratio or exchange conversion. This is equivalence arithmetic, not a guaranteed executable receipt price.

12. A receipt's simple underlying equivalence guarantees what market price?
Answer and detailed reasoning

Correct: C. No exact tradable parity without considering constraints

Fees, liquidity, conversion conditions and demand can affect prices. The arithmetic benchmark alone does not guarantee parity or a persistent premium or discount; the actual market and legal structure need analysis.

13. An ECB assessment should establish what?
Answer and detailed reasoning

Correct: C. Borrower, lender, currency, maturity, use and applicable conditions

The framework has several connected conditions. One favourable attribute does not establish eligibility. A full assessment therefore checks the parties, terms, purpose and operative rules rather than assuming permission from price or branding.

14. Why is an older ECB table insufficient for current advice?
Answer and detailed reasoning

Correct: C. The framework and operative text may have changed

Historical material needs version control because rules can change. It can still teach context, but an index is not complete text and a favourable economic calculation cannot establish legal permission.

15. A dollar loan funded by rupee revenue creates what direct issue?
Answer and detailed reasoning

Correct: C. Currency mismatch in repayment resources

Dollar obligations require dollars or conversion. Rupee revenue alone does not match them; currency movements and hedging costs can change domestic cost, so a low coupon does not guarantee cheap funding.

16. Gross dollar export sales prove a complete natural hedge?
Answer and detailed reasoning

Correct: A. No, amounts, timing and other dollar uses also matter

A natural match requires reliable net resources aligned with obligations. Gross sales can be uncertain or needed elsewhere; ignoring timing and costs overstates protection and can leave a repayment shortfall.

17. A USD1 million loan deducts USD10,000 fee. Net proceeds are?
Answer and detailed reasoning

Correct: C. USD990,000

The deducted fee reduces available funds to 990,000. Adding it reverses the cash flow, ignoring it overstates proceeds, and the fee alone is not the amount the borrower can use.

18. Repayment USD1,050,000 against net proceeds USD990,000 gives one-year cost of approximately what?
Answer and detailed reasoning

Correct: D. 6.0606%

The financing difference is 60,000 divided by 990,000. Five percent ignores the upfront deduction; one percent considers only the fee and sixty percent mis-scales the resulting ratio.

19. Net proceeds USD990,000 at 84 and repayment USD1,050,000 at 87 imply rupee cost of approximately what?
Answer and detailed reasoning

Correct: B. 9.8485%

Rupee amounts are 83.16 and 91.35 million; their difference divided by 83.16 is about 9.8485%. Dollar cost and currency movement alone each omit part of the combined effect.

20. Principal repaid 60% at year one and 40% at year four has simple weighted maturity of?
Answer and detailed reasoning

Correct: D. 2.2 years

Use principal weights: 0.6×1+0.4×4=2.2. An unweighted average ignores amounts, while selecting either extreme omits the other repayment. Legal maturity definitions still require separate verification. Interest payments are not principal weights in this exercise.

21. Supplier's credit differs from buyer's credit because?
Answer and detailed reasoning

Correct: D. The supplier allows deferment rather than another lender funding the buyer's payment

The financing-party structure differs. Both can create repayment obligations, but their contracts and flows are not necessarily identical. Product analysis should identify who pays whom and who becomes the creditor.

22. USD500,000 for ninety days at 6%, basis 360, costs what simple interest?
Answer and detailed reasoning

Correct: C. USD7,500

Interest is 500,000×0.06×90/360=7,500. Thirty thousand is a full year's amount, seven hundred fifty mis-scales it, and nine thousand belongs to the alternative deferred-price example rather than this formula.

23. A rupee-denominated overseas bond primarily fixes what for the rupee-paying issuer?
Answer and detailed reasoning

Correct: D. Contractual rupee principal and interest amounts under its terms

Denomination determines contractual currency. Investors' translated returns and the issuer's other business costs can still vary, while refinancing depends on later conditions. Rupee denomination does not eliminate all economic risk.

24. INR84 million principal converts at INR90 per USD to approximately what?
Answer and detailed reasoning

Correct: A. USD933,333.33

Divide rupees by rupees per dollar: 84 million/90. The original dollar equivalent used a different rate; multiplying or ignoring conversion produces the other errors. Coupons are excluded from this principal-only illustration.

25. After disbursement, international debt needs what?
Answer and detailed reasoning

Correct: C. Continued payment, covenant, reporting and amendment monitoring

Obligations continue through the financing life. A screenshot is insufficient evidence, and amendments can require new analysis. Original permission does not automatically authorise every later change or eliminate ongoing reporting and cash planning.

Ready: 25 questions.

Sources and version notes

Prepared 7 November 2026. Review edition; independent academic approval and current rule-consolidation verification remain pending. Original examples are illustrative. External source links require internet.

Module C contentsPrevious chapterNext chapter